CONTROL BOARDS - DE@NET


Art. NET24N

Control board 24V (only circuit).
Code 678251

Universal control board (only circuit) for 1 or 2 operators in 24V, with or without encoder. It is complete with anti-crushing safety device, integrated 433 Mhz radio receiver (rolling code or dip switch coding) speed adjustment during normal cycle and slow down in opening and closing.


Art. NET230N

Control board 230V (only circuit)
Code 677600

Universal control board (only circuit) for 1 or 2 operators in 230V, with or without encoder. It is complete with anti-crushing safety device, integrated 433 Mhz radio receiver (rolling code or dip switch), speed adjustment during normal cycle and slow down in opening and closing.


Art. NET230N/C

Universal digital control board 230V with box.
Code 677610

Universal control board for 1-2 operators in 230V, with or without encoder. Possibility to select the type of installation (sliding, swing, counterweight doors, barriers, sectional doors). The inputs to connect the differents device could be personalize. Possibility of adjustment more than 70 operating parameters such as strength, speed and duration of the slowdown, anticrush sensor sensitivity, possibility of blocking the programming to prevent tampering of the installation, etc. Simplified learning procedure. Input to connect BUS devices (DigiNET, Linear/NET). 433 MHz radio receiver for up to 100 remote controls (fixed or rolling code coding). Complete of box 100G.


Art. NET24N/C

Control board 24V with box.
Code 678261

Universal control board for 1-2 operators in 24V, with or without encoder. Possibility to select the type of installation (sliding, swing, counterweight doors, barriers, sectional doors). The inputs to connect the differents device could be personalize. Possibility of adjustment more than 70 operating parameters such as strength, speed and duration of the slowdown, anticrush sensor sensitivity, possibility of blocking the programming to prevent tampering of the installation, etc. Simplified learning procedure. Input to connect BUS devices (DigiNET, Linear/NET). 433 MHz radio receiver for up to 100 remote controls (fixed or rolling code coding). Complete of box 100G.


Art. NET24N/C250

Control board 24V with box.
Code 678263

Control board NET24N/C with 250W tranformer to be used with operators REV designed for IRONBOX. Complete of box.


Art. NET24N/PROBOX

Control board 24V
Code 678264

NET24N control board, mounted on plate with cable holders and DIN rail to be used with art.STEELBOX.


Art. NET230N/PROBOX

Control board 230V
Code 677611

NET230N control board, mounted on plate with cable holders and DIN rail to be used with art.STEELBOX.


Art. NET-EXPANSION

Expansion board
Code 677620

Expansion board 6 inputs - 8 outputs for control borads NET series. New features can be activated in the NET control board including: analog or resistive inputs, traffic light control, compass control, alarm contact with automatic closing when the power failure, open gate warning light with variable frequency in opening/closing (cable length 300mm + spacers). Compatible only with DE@NET boards with serial port (NET230N and NET24N from the version 30, NET724N from version 1)


Art. NET724N

Control board (without box, only circuit)
Code 678271

Control board for ADVANCE and SPACE operators


Art. NET724N/XL

Control board (without box, only circuit)
Code 678281

Control board for ADVANCE/XL, SPACE/XL and SPACE/XXL operators