The device for the management of your remotes from your office
The device for the management of your remotes from your office
The device for plant maintenance and remote control management
The device for managing installations locally
NETLINK is the DEA technology that allows you to configure your installations and manage them locally and remotely, from your PC or smartphone. The NETLINK system is used by NET-COM, NET-BOX and NET-NODE.
NET-COM is the device located inside the installation that makes possible both remote control and advanced management of the automations.
SMART MANAGEMENT
NET-COM allows you to manage and intervene remotely on DE@NET control units quickly and precisely, without moving from the office.
Thanks to NET-COM you can:
check the correct functioning of the system
read and modify installation parameters
consult the register of the events recorded by the control unit
ONE RECEIVER, MANY FUNCTIONS
NET-COM is an interactive receiver that monitors and manages accesses.
The device allows you to:
manage up to 1,500 remote controls, selecting the time slots and consulting the access register
set programmed automatic opening and closing times with annual calendar
open the gate telephonically (after enabling)
In addition, you can connect NET-COM to any brand of control units and take full advantage of all receiver features.
CONTROL THE GATE WITH YOUR SMARTPHONE
Thanks to the DEAuser app you can use your smartphone to open the gate without the need for keys or access codes to keep in mind. In addition, if you have also installed NET-COM with a data SIM card, then you can even check the status of the automation remotely, fine-tune the automatic opening and closing times, and check the access register via remote control.
The NET-COM/S version includes a DEA SIMcard with prepaid connectivity service for 5 years.
ATTENTION: GSM remote connectivity is available only in European countries that support 2G technology.
NET-BOX is the bench programmer that reads, clones and customises remote controls and control units for gates quickly and accurately.
NET-BOX allows you to:
● Create and activate pre-recorded virtual remote controls in the memory of the control unit or receiver
● Increase the security of the remote controls by setting a customised encryption key
● Read the features of a DEA remote control and transfer them to a new one
● Clone the features of a remote control in series in a few simple steps, for fixed code transmission systems
● Replace a stolen or lost remote control in complete safety. The loss of a remote control generates an understandable concern. With NET-BOX you can create a remote control that eliminates the one it replaces.
Thanks to NET-BOX, the management of remote controls for gates becomes a fast and error-proof operation.
NET-BOX also allows you to program the DE@NET control units conveniently on the bench by transferring the preset data in DEAcloud directly to the control unit which will then be installed in the external automation.
NET-NODE is the device that allows communication between DE@NET control units and DEAinstaller or DEAuser app installed on your smartphone.
SMART ELECTRONICS
Thanks to NET-NODE you can use the DEAinstallerapp to program the parameters of DE@NET control units and store them immediately on DEAcloud. Your data will be immediately secure, always updated and available for consultation at any time, wherever you are.
CONTROL THE GATE WITH YOUR SMARTPHONE
NET-NODE is a receiver-transmitter which communicates with the phone via the app DEAuser. Use your smartphone to open the gate without the need for keys or access codes to keep in mind.